Excalibur® 400FF Series – Fast Fusion Plastisol

Excalibur® 400FF Series – Fast Fusion Plastisol
  • Excalibur® 400FF Series (Direct Print) - Fast Fusion

Starting at $31.15

Ideal for Printing onto Temperature Sensitive Fabrics

Very Opaque with High Stretchability

400FF Series Plastisol Ink is a fast fusion ink system that can be used for screen printing high stretch fabrics that require a lower curing temperature. 400FF Series is designed to comply with requirements for heavy metal and other restricted chemicals. Curing can be achieved at 135°C to 140°C or approximately 275°F to 285°F.

Technical Details:

Stencil: All types
Mesh: 60 to 160/inch (24T to 64T/cm). Choice of mesh depends on deposit and opacity required.
Reducer: If viscosity modification is necessary slight amounts up to 3% of 501 Curable Reducer or 502 Reducer may be added to the ink. Note: addition of 502 Reducer can increase curing time.
Squeegee: Use a medium (70) durometer as a minimum, but a triple durometer (70/90/70) is optimal.
Curing: Full cure can be reached at temperatures from 275-285F (135- 140C). Extra time in the oven will be needed for the lower temperatures. After curing has finished, let the print cool. The print should stretch without cracking. If it cracks too easily, it is under cured and oven temperature should be increased or the belt speed should be slowed. Tests for product compatibility should always be conducted prior to production runs.
Clean up: TR-Blend or 2000 Green

Clear
  • Product Enquiry
  • Category: .